PrimaValue™ is a series of filament we developed for everyday use, perfect when you need a high quality filament in standard colours. When Quality Counts You should choose PrimaValue! 1 kg of high quality 3D-Print material for your 1.75 mm 3D-Printer. Performance: • PrimaValue™ is a very good filament for everyday use. • High strength • Almost warp free •
1 kg of high quality 3D-Print material for your 1.75 mm 3D-Printer.
Performance:
• PrimaValue™ is a very good filament for everyday use.
• High strength
• Almost warp free
• Good interlayer adhesion
• Good toughness
High quality:
• Only high quality materials are used to produce PrimaValue™
• Perfect roundness and very tight diameter tolerance
• Strict quality control and extensive testing
Practical:
• Filament from 3D Prima is compatible with nearly all 3D printers on the market today
• Big spool diameter for smoother unwinding
• Heated build platform not required (recommended with ABS)
Economical:
• Higher quality results in less waste
• Large production volumes gives you a lower price
• No excessive heat results in lower print costs
• Full 1 kg, approximately 335 meter of filament on each spool
Ease of use:
• No heated platform is required (recommended with ABS)
• PrimaValue™ has very smooth flow characteristics
• Filament from 3D Prima is compatible with nearly all 3D printers on the market today
Packaging:
• 1 kg of filament on a spool total weight around 1,40 kg
• Packed in vacuum sealed plastic bag with silica gel
You must be logged in to post a comment.
){kind=link}
Good value filament, that requires slightly higher temperatures. Extruder: 0.3mm @ 210°CBed: 55°C0.2mm first layer heightFilament provides consistent results but does require a slightly higher temperature than expected. Diameter is regular throughout and wound to the spool nicely. Experienced clogs at temperatures lower than 205°C with a 0.3mm nozzle. I have purchased a second spool, having had good results with the first.
Very good PLA for the price I am new to 3D printing and I know that I will waste a lot of material in learning. So I want something cheap.I bought the white one which prints really good at 195C nozzle temperature. Although a heat bed is not strictly required for PLA, a 60-70C heat bed really helps to reduce warping. Like most suggestions, I set the heat bed to 70C for the first layer and 60C afterwards.It works well and I will definitely buy this brand again.
Works well on my Flashforge Creator Pro My collection of filaments is growing really fast and I’ve only had my 3D printer for a month! I have ordered a few rolls from Primavalue and they’ve all been good and dependable. Prints come out well enough and they stick well.One of the cheapest dependable rolls on Amazon!Will keep buying them!