3D Prima PrimaValue PLA Filament, 1.75 mm, 1 kg Spool, Dark Grey

December 12, 2017 - Comment

Product Features When Quality Counts – You should choose PrimaValue! 1 kg of premium quality PLA 3D-Print material for your 1.75 mm 3D-Printer. Full 1 kg, approximately 335 m of filament on each spool Good roundness and tight diameter tolerance.  

Product Features

  • When Quality Counts – You should choose PrimaValue!
  • 1 kg of premium quality PLA 3D-Print material for your 1.75 mm 3D-Printer.
  • Full 1 kg, approximately 335 m of filament on each spool
  • Good roundness and tight diameter tolerance.

 

3D Printers Massive 50% Off Price Crash

Comments

Roboticexile says:

Good value filament, that requires slightly higher temperatures. Extruder: 0.3mm @ 210°CBed: 55°C0.2mm first layer heightFilament provides consistent results but does require a slightly higher temperature than expected. Diameter is regular throughout and wound to the spool nicely. Experienced clogs at temperatures lower than 205°C with a 0.3mm nozzle. I have purchased a second spool, having had good results with the first.

Old Hui says:

Very good PLA for the price I am new to 3D printing and I know that I will waste a lot of material in learning. So I want something cheap.I bought the white one which prints really good at 195C nozzle temperature. Although a heat bed is not strictly required for PLA, a 60-70C heat bed really helps to reduce warping. Like most suggestions, I set the heat bed to 70C for the first layer and 60C afterwards.It works well and I will definitely buy this brand again.

mFlex says:

Works well on my Flashforge Creator Pro My collection of filaments is growing really fast and I’ve only had my 3D printer for a month! I have ordered a few rolls from Primavalue and they’ve all been good and dependable. Prints come out well enough and they stick well.One of the cheapest dependable rolls on Amazon!Will keep buying them!

Write a comment

Red inc 2018